Izba No2

This is the second house from the Pegasus Models 'Russian Farm Houses Set'.

Not a lot a can say about it. Simple enough model goes together well. Roof is removable.

Floor made from 1mm plasticard. Again no floor included in the model. Currently reading 'In Deadly Combat' by Gottlob Bidermann., highly recommended. In between decriptions of combat and army life, he gives an interesting picture of different area's of Russia. In which he describes one of the cottages having a hard clay floor. So something to think of for next time.   

Kept the model simpler that the first one, adding only a few details.

I may go back and add some more detail at a later date but for now it is finished.

One thing I will point out is that the rooves on both these models sit very tight and will not fall off even if turned upside down! Good for storage and travel.

That's it for now. More to follow soon...   

 

 

T-34/76 Model 1943

Well from that catchy title it should not be hard to deduce what this post is about!

A Zvezda 1/72 snap fit T-34/76 Model 1943. It builds into a nice little model too. The finished build with added grab handles; the only thing I added to the kit. Well other than the wire for the radio antenna. The grab handles are 0.5mm brass wire.

The tracks have not been painted. They come in a black hard plastic and are very well detailed.

So this the finished kit in a basic green scheme. Following chipping, oil paint, pigment and enamel paint weathering.

The base is 2mm plasticard. Drilled to fit two 6mm magnets for storage. I put a layer of DAS putty over the top to add a bit of ground with sand and ballast for texture. Then airbrushed a couple of different earth colours, washes and drybrushed. I decided to use just flock for the grass...because I liked it as is.

Just to prove the turret does turn...

The decal is from Plastic Soldier Company.

That's it for now. More to follow soon.... 

 

 

For the Motherland!!!

A return to my favourite period...WW2 Eastern Front and in 20mm no less. I real return to my youth!

So first up a Tank Rider Platoon

The figures are AB Figures/Fighting 15's. To be more specific they are AB Figures now part of Eureka (from Down Under) and are available from Fighting 15's in the UK. Very nice little figures and fun to paint.

They are based on Warbases one penny trays. Original bought for another project I decided to make use of them here. These ones did not have the hole for a magnet, so a quick ten minutes with the Dremel and 3mmx2mm magnets could be inserted into the base. The figures are mounted on 1p coins (obviously :-)).

 

  

Based for use with Chain of Command by Toofatlardies. Each squad consists of an NCO, LMG team and SMG team.

My sudden exuberance for all things magnet, meant it was an easy choice to use the MDF bases both to speed up movement on the games table and for ease of storage ( see earlier posts).

So we have three squads plus an officer. Intend to add some support weapons plus a rifle platoon. I've decided to concentrate my forces initially for the Summer of 1943 and just after.

 

That's it for now more to follow soon... 

  

BT-7

Been a while since last post, partly because I have got side tracked off the Aliens project and partly because I have spent the last two weeks finishing off this....

Soviet BT-7 light tank. The model is from Warlord Games and is a nice little kit. Also it's not actually mine. I have done it for a good wargaming Buddy; who I must offer an apology too for taking so long to finish it off.

The kit was given to me pre-built and undercoated in black. So I touched up the undercoat and painted it with Vallejo Air Camouflage Light Green 71006. This is what she looked like after the initial colour and chipping (using the hairspray method).

I decided I wanted to make her look like a old Russian warhorse, tired and worn. Hence the light green colour to represent too much time spent in the sun!

Then it was on with the weathering using enamel filters, enamel washes, oil paint and pigments. Slowly building the colours up to represent wear and tear.

Now I have to get her to the rightful owner and hope he is happy with the finished product.

That's it for now more to follow....